RuuviTag Pro - Industrial Wireless Temperature and Humidity Sensor

RuuviTag Pro has an extremely accurate temperature sensor on board. The sensor is designed to meet ASTM E1112 and ISO 80601 requirements for electronic patient thermometers.

Measurement resolution is 0,01 °C, while absolute accuracy is astounding at ±0,1 °C across the temperature range of –20 to +50 °C, with no calibration.

The sensor units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards.

RuuviTag Pro tolerates wet and rough conditions.

The IP67 certified RuuviTag Pro (4in1 and 3in1) comes with a breathable membrane that enables air humidity and air pressure monitoring. It tolerates temporary wet conditions and it’s a good choice to outdoor use. The 4in1 and 3in1 models are for non-condensing uses only.

The IP68 and IP69K certified RuuviTag Pro (2in1) offers a full protection against water with its fully sealed enclosure. It has been laboratory tested to work in water depth of up to 50 meters for 24 hours and to tolerate high pressurised spraying with 80 °C water.

Note! Please keep in mind that Bluetooth signals are strongly attenuated in the water and range will be significantly reduced. Ruuvi sensors can then be used in shallow water if you want to maintain connection (for example pool or jacuzzi). If you want to measure deeper, you can attach the RuuviTag Pro to a string and take it back to the surface when you want to download the data history.

RuuviTag Pro has two strong mounting ears that allow reliable installation methods to be used. Wooden ceilings, gyproc walls, concrete foundations, you name it. Attach and measure professionally wherever you need to.

RuuviTag Pro’s casing and electronics are designed to operate without interruption in a wide range of temperatures. Maintenance is minimal because the included Ruuvi CR2477T wide temperature battery lasts in normal use 1-2 years.

RuuviTag Pro has three models:

• Fully sealed 2in1 version that measures temperature and motion

• Breathable 3in1 model that measures temperature, humidity and motion

• Breathable 4in1 version that measures temperature, humidity, air pressure and motion

RuuviTag Pro’s fully sealed version is IP68 and IP69K certified. This means that it tolerates wet conditions like never seen before.

The IP67 model has a weather resistant membrane that allows air to pass through. This is a requirement to allow you to measure air humidity and air pressure.

• RuuviTag Pro

• Quick start guide

• Mounting screws

RuuviTag Pro has been professionally laboratory tested and certified for IP67, IP68 and IP69K.

IP67 tolerates wet condition only temporarily. It can be used outside as long as the breathing membrane will not stay wet more than 30 minutes.

IP68 certification ensures that RuuviTag Pro will function in water depth of up to 50 meters for 24 hours.

IP69K means that the unit has undergone a challenging set of tests to ensure that it offers protection against penetration of high pressure and high temperature water of 80 °C.

RuuviTag Pro has several new features such as:

• High accuracy temperature sensor

• Wide operating temperature range

• IP67, IP68 and IP69K certifications

• Professional mounting

• Industrial design

• Optional expansion port

• Sensor configuration depends on the model

Operating temperature: -40 ºC to +85 ºC

Battery: 1000 mAh CR2477T battery (included)

Radio protocols: Bluetooth (default), Wirepas mesh, Lumenradio mesh, Bluerange mesh, Other 2,4 GHz proprietary protocols

Temperature sensor accuracy: Absolute accuracy ±0,1 °C, output resolution 0,01 °C

Humidity sensor accuracy: Typical absolute accuracy ±2 %, 20...80 %, 25 °C (only 3in1)

Pressure sensor accuracy: Typical absolute accuracy ±1 hPa

Main chip: Nordic Semiconductor nRF52832

Temperature sensor: Texas Instruments TMP117AIDRVR

Humidity sensor: Sensirion SHTC3 (4in1 and 3in1 only)

Pressure sensor: Infineon DPS310 (4in1 only)

Accelerometer: STMicroelectronics LIS2DH12

NFC: Embedded NFC™-A tag antenna

Enclosure material: Rugged polycarbonate

Waterproofing: IP67 (4in1 and 3in1), IP68 & IP69K (2in1)

Certifications: CE, FCC, ISED, TELEC, IFETEL, NOM, RTCA DO-160, RoHS, IP67, IP68, IP69K